• Your shopping cart is empty!

  • ASTM A691/A691M-18

ASTM A691/A691M-18

Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures

ASTM International, 03/01/2018

Publisher: ASTM

File Format: PDF

$29.00$58.00


Published:01/03/2018

Pages:6

File Size:1 file , 110 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This specification2 covers carbon and alloy steel pipe, electric-fusion-welded with filler metal added, fabricated from pressure-vessel-quality plate of several analyses and strength levels and suitable for high-pressure service at high temperatures. Heat treatment may or may not be required to attain the desired mechanical properties or to comply with applicable code requirements. Supplementary requirements are provided for use when additional testing or examination is desired.

1.2 The specification nominally covers pipe 16 in. [400 mm] in outside diameter and larger with wall thicknesses up to 3 in. [75 mm] inclusive. Pipe having other dimensions may be furnished provided it complies with all other requirements of this specification.

1.3 Several grades and classes of pipe are provided.

1.3.1 Grade designates the type of plate used as listed in Table 1.

(A) Hardness values listed are applicable to S3.
(B) Grade 91 shall be designated by Type 1 or Type 2 when required by the prevalent specification.

1.3.2 Class designates the type of heat treatment performed in the manufacture of the pipe, whether the weld is radiographically examined, and whether the pipe has been pressure tested as listed in 1.3.3.

1.3.3 Class designations are as follows (Note 1):

Class

Heat Treatment on Pipe

Radiography, see Section

Pressure Test, see Section

 

 

 

 

10

none

none

none

11

none

9

none

12

none

9

8.3

13

none

none

8.3

20

stress relieved, see 5.3.1

none

none

21

stress relieved, see 5.3.1

9

none

22

stress relieved, see 5.3.1

9

8.3

23

stress relieved, see 5.3.1

none

8.3

30

normalized, see 5.3.2

none

none

31

normalized, see 5.3.2

9

none

32

normalized, see 5.3.2

9

8.3

33

normalized, see 5.3.2

none

8.3

40

normalized and tempered, see

ASTM E1771-95(2001)

ASTM E1771-95(2001)

Standard Test Method for Determination of Copper in Anode and Blister Copper

$25.00 $50.00

ASTM D85-87(1999)

ASTM D85-87(1999)

Standard Specification for Ochre Pigment

$25.00 $50.00

ASTM E3029-15

ASTM E3029-15

Standard Practice for Determining Relative Spectral Correction Factors for Emission Signal of Fluorescence Spectrometers

$34.00 $68.00

ASTM D7469-10

ASTM D7469-10

Standard Test Methods for End-Joints in Structural Wood Products

$33.00 $67.00