BS PD 6662:2017

BS PD 6662:2017 describes a scheme which enables I&HASs to be installed and maintained in accordance with published British and European Standards.

The scheme described in this Published Document applies to IASs, HASs and I&HASs, with wired interconnections and/or wire-free interconnections. However, the scheme does not apply to exterior IASs which are installed in accordance with BS 4737-4.3, nor does it apply to portable hold-up devices which report directly to a monitoring centre.

This Published Document is intended to be applied in conjunction with the standards and documents listed in Clause 3.


Cross References:
BS 4737-3.14:1986
BS 4737-3.0:1998
BS 4737-3.6:1978
BS 4737-3.3:1977
BS 4737-3.8:1978
BS 4737-3.9:1978
BS 4737-3.1:1977
BS 4737-3.12:1978
BS EN 50131-4:2009
BS EN 50131-2-6:2008
BS EN 50131-1:2006+A2:2017
BS EN 50131-2-2:2008
BS EN 50131-5-3:2017
BS EN 50131-8:2009
BS EN 50131-2-7-1:2012+A2:2016
BS EN 50136-2:2013
PD CLC/TS 50131-2-9:2016
BS EN 50131-2-3:2008
BS EN 50131-2-7-3:2012+A2:2016
PD CLC/TS 50131-2-11:2017
BS EN 50131-2-5:2008
CLC/TS 50131-7:2003
BS EN 50131-2-7-2:2012+A2:2016
BS EN 50131-2-4:2008
BS EN 50131-3:2009
BS EN 50131-2-8:2016
BS EN 50131-6:2008+A1:2014
PD 6662:2010
BS 8473:2006+A2:2013
BS 4737-3.2:1977
BS 4737-3.30
BS 4737-3.13:1978
BS 4737-3.5:1978
BS 7671:2008+A3:2015
BS 7858:2012
BS EN 50136-1:2012
BS 4737-4.3


Replaced by PD 6662:2010 which remains current.

All current amendments available at time of purchase are included with the purchase of this document.