BS PD 8010-2:2015+A1:2016

BS PD 8010-2:2015+A1:2016 gives recommendations for and guidance on the design, selection, specification and use of materials, construction, installation, testing, commissioning, operation, maintenance and abandonment of steel subsea pipelines in offshore, nearshore and landfall environments. Guidance on the use of flexible composite pipelines is also given.

It is not intended to replace or duplicate hydraulic, mechanical or structural design manuals.

This part of PD 8010 is applicable to subsea pipelines intended for the conveyance of hydrocarbon liquids, hydrocarbon gases, carbon dioxide and other gases, liquids and gases in two-phase flow, fluid-based slurries and water.

NOTE 1 Although primarily concerned with subsea pipelines associated with the oil and gas industry, PD 8010-2 is likely to have application to a wider range of offshore activities.

The extent of pipeline systems covered by this part of PD 8010 is shown in Figure 1. This part of PD 8010 is applicable to pipelines in water depths up to 500 m.

NOTE 2 In deeper water, other international codes such as "DNV-OS-F101" are applicable.


Cross References:
ASME B16.5
ASME B16.9
ASME B16.11
ASME B16.20
ASME B16.21
ASME B16.47
ASME B31.3
ASME B31.8
ASME BPVC-VIII-1
ASME BPVC-IX
ASTM A193/A193M
ASTM A194/A194M
ASTM A262
ASTM A264
ASTM A265
ASTM A312
ASTM A320/A320M
ASTM A790
ASTM B423
ASTM B444
ASTM C171
BS 1881
BS 3293
BS 3518-1
BS 3518-3
BS 3799
BS 4482
BS 4483
BS 4515-1
BS 4515-2
BS 4882
BS 6349-1-4
BS 6374-3
BS 6374-4
BS 7371-12
BS 7448
BS 7608
BS 7910
BS EN 197-1
BS EN 1991-1-4
BS EN 10204
BS EN 10224
BS EN 10244-2
BS EN 10311
BS EN 12620
BS EN 13480-3
BS EN ISO 148-1
BS EN ISO 1461
BS EN ISO 3183:2012
BS EN ISO 8501
BS EN ISO 8502
BS EN ISO 8503
BS EN ISO 9606-1
BS EN ISO 12944
BS EN ISO 13628-2
BS EN ISO 13628-15
BS EN ISO 14713
BS EN ISO 15156
BS EN ISO 15607
BS EN ISO 15609
BS EN ISO 15610
BS EN ISO 15614
BS EN ISO 15653
BS EN ISO 15589-2
BS ISO 1143
BS ISO 7005-1
BS ISO 10474
BS ISO 12107
ISO 14313
ISO 15590-1
ISO 15590-2
ISO 15590-3
ISO/DIS 13628-14
PD 5500
API 5L:2012
API 5LC
API 5LD
API 6A
API 17J
API 1104
API RP 17B
API RP 170
AWWA C205
AWWA C602
DNV-OS-F101
DNV-RP-F103
DNV-RP-F106
MSS SP 44
NACE MR0175
ASTM E1049-85(1997)
BS 6349-1-1
BS EN 752
BS EN 1008
BS EN 1992-1-1
BS EN 12390-3
BS EN 12504-1
BS EN 14161
BS EN ISO 9000
BS EN ISO 9001
BS EN ISO 9004
BS EN ISO 13628-5
BS EN ISO 14001
BS EN ISO 80000-1
ISO 13623
PD 8010-1
PD 8010-3
PD 8010-4
PD 8010-5
API RP 2A WSD
API RP 5L1
API RP 5LW
API RP 14E
API RP 579
DNV-RP-B401
DNV-RP-F102
DNV-RP-F105
DNV-RP-F107
DNV-RP-F108
DNV-RP-F109
DNV-RP-F110
DNV-RP-F111
DNV-RP-F204
DNV-RP-J202
DNV-RP-O501
NACE TM0177
NACE TM0284
Coast Protection Act 1949
Construction (Design and Management) Regulations 2007
Continental Shelf


Incorporates the following:
Amendment, November 2016. Amends and replaces PD 8010-2:2015